ANT-AQU4518R21v06-1888-001 Datasheet

 Documents

 141 views
of 2
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Description
antena
Share
Tags
Transcript
  1  AQU4518R21v06 DXXXX-1710-2690/1710-2690/1710-2690/1710-2690-65/65/65/65- 18i/18i/18i/18i-M/M/M/M-R EasyRET 4H 8-Port Antenna with 4 Integrated RCUs - 1.4m Mechanical Properties  Antenna dimensions (H x W x D) (mm) 1499 x 449 x 115 Packing dimensions (H x W x D) (mm) 1835 x 510 x 185  Antenna weight (kg) 23.9 Clamps weight (kg) 3.6 (2 units)  Antenna packing weight (kg) 35.8 (included clamps) Mast diameter supported (mm) 50 - 115 Radome material Fiberglass Radome colour Light grey Operational temperature ( ℃ ) -40 .. +65 Wind load (N) Frontal: 775 (at 150 km/h) Lateral: 90 (at 150 km/h) Rear side: 870 (at 150 km/h) Max. operational wind speed (km/h) 200 Survival wind speed (km/h) 250 Connector 8 x 4.3-10 Female Connector position Bottom  Accessories   Item Model Description Weight Units per antenna Downtilt kit ASMDT0D01 Mechanical downtilt: 0 - 16 °  2.1 kg 1 (Separate packing) 1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available. Electrical Properties Frequency range (MHz) 4 x (1710 - 2690) 1710 - 1990 1920 - 2200 2200 - 2490 2490 - 2690 Polarization +45 °  , -45 °  Electrical downtilt ( ° ) 0 - 12 , continuously adjustable, each band separately Gain (dBi) at mid Tilt 17.4 17.7 17.9 18.3 over all Tilts 17.2 ± 0.5 17.5 ± 0.5 17.7 ± 0.5 18.0 ± 0.5 Side lobe suppression for first side lobe above main beam (dB) > 18 > 18 > 19 > 20 Horizontal 3dB beam width ( ° ) 68 ± 5 64 ± 5 61 ± 5 60 ± 5 Vertical 3dB beam width ( ° ) 6.8 ± 0.5 6.1 ± 0.4 5.4 ± 0.4 5.0 ± 0.3 VSWR < 1.5 Cross polar isolation (dB) ≥ 28  Interband isolation (dB) ≥ 28 (1710 - 2690 // 1710 - 2690 MHz) Front to back ratio, ± 30 °  (dB) > 27 > 28 > 28 > 28 Cross polar ratio (dB) 0 °  > 22 > 22 > 22 > 23 Max. power per input (W) 250 (at 50 ℃  ambient temperature) Total power (W) 800 (at 50 ℃  ambient temperature) Intermodulation IM3 (dBc) ≤ -153 (2 x 43 dBm carrier) Impedance (Ω)  50 Grounding DC Ground  Antenna Specifications 106    1   4   9   9    1   3   8   5   Properties RET type Integrated RET RET protocols* AISG 2.0 / 3GPP Input voltage range (V) 10 - 30 DC Power consumption (W) < 6 (motor activated, 12V) < 1.5 (stand by, 12V)  Adjustment time (full range) (s) < 65 (typically, depending on antenna type) RET connector 4 x 8 pin connector according to IEC 60130-9 Daisy chain in: Male / Daisy chain out: Female Pin assignment according AISG 1 2 3 4 5 6 7 8 DC n/c RS-485B n/c RS-485A DC DC return n/c Lightning protection (kA) 3 (10/350 μ s) 10 (8/20 μ s) Integrated RET Specifications * Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function, contact Huawei before system installation. Integrated RET S/N: y - Yellow L - Left array R - Right array C - Center array HWMxxx……….yL HWMxxx…....yyCL HWMxxx…..yyyCR HWMxxx…...yyyyR 2 yL yyCL yyyCR yyyyR 1. Facilities, such as towers and poles, must bear the weight and wind load of antennas. 2. HUAWEI ‘s standard brackets and accessories must be used for any installation. 3. The antenna working environment must meet the requirements specified in the datasheet. 4. Only qualified personnel are allowed to perform installation. Installation tools and procedures must conform to requirements described in the antenna installation guide. NOTE   2  Any previous datasheet issues become invalid. Issue: 2017-02-27 Huawei Technologies Co., Ltd. Bantian, Longgang District, Shenzhen 518129, P.R.China www.huawei.com/antenna 1710 - 2690 MHz (Left) Pattern sample for reference 1710 - 2690 MHz (Center Left) Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55032 (Emission), EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003 Certification:  CE, FCC, IC, RCM  AQU4518R21v06 DXXXX-1710-2690/1710-2690/1710-2690/1710-2690-65/65/65/65- 18i/18i/18i/18i-M/M/M/M-R EasyRET 4H 8-Port Antenna with 4 Integrated RCUs - 1.4m
Related Search
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks